RTS-500 Cutter Adapter for Festool Domino DF 700 – Seneca Woodworking
4.6 (291) · € 30.50 · En Stock
The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500. This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth. Because of the lower fence travel limit of the Domino XL, the RTS-500
Seneca Woodworking Small Mortise Kit for Festool Domino XL DF700
Seneca Woodworking Small Mortise Kit for Festool Domino XL DF700 – Stockroom Supply Tools
86 - Seneca Woodworking Domino Accessory Review and Preview
0 Offset Domiplate™ XL (Zero Offset Domiplate XL) in 2023
Domino Cutters for Slot Mortising - Canadian Woodworking and Home Improvement Forum
Seneca Woodworking – Stockroom Supply Tools
The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter.
Seneca Woodworking RTS-500 Cutter Adapter for Festool DF700
The Domiplate XL is for the Domino XL DF700. For the DF500 version, click HERE., The Seneca Woodworking Domiplate XL™ is a fixed fence solution
Domiplate™ XL for 1/2 and 3/4 Ply
Seneca Woodworking SWMK01 Small Mortise Kit for Festool Domino XL DF700
Cutter Adapter for Festool Domino DF 700, Free Return
The Seneca Woodworking 45 degree Dock Plate Stop works with our Dock Plate XL to make mortising 45 degree trim pieces a breeze. This stop is a fixed 45 degree angle and comes in a right and left version, or as part of a set. Stops can be used individually or together; To use together, two of the same right or left stop are needed to clamp both sides of the workpiece. This product page is for the STOP ONLY.
45 Degree Dock Plate Stop Right & Left 45 Degree Dock Plate Stop Set
