ESP32 Wroom WIFI + Bluetooth - CP2102 (38 pin)

4.5 (125) · € 5.50 · En Stock

It is a generic card with Wi-Fi connectivity based on the well-known ESP32 (WROOM32). This board does not have an AVR microcontroller, but uses the ESP32 as the main processor. It is fully compatible and programmable with Arduino, but it is much more powerful and works at 240 MHz. It has a microUSB connector for power and programming and can be programmed with the Arduino IDE. Delivered with soldered pins. • Tensilica LX6 240 MHz dual core microcontroller - 600 DMIPS • Wi-Fi 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP • 520KB SRAM • Bluetooth dual band (classic and BLE) • 4 MByte Flash • Integrated PCB antenna • Ultra Low Noise Analog Amplifier • Hall-sensor • 10 capacitive pins • 32 kHz crystal oscillator • 3 x UARTs (only two are configured by default in the Arduino IDE, one of them used for bootloading/debugging) • 3 x SPI (only one set by default in Arduino IDE) • 2 x I2C (only one configured by default in Arduino IDE) • 12 x ADC inputs • 2 x I2S Audio • 2 x DACs • PWM/timer input/output available on every GPIO pin • OpenOCD debug interface with 32 kB TRAX buffer • SDIO master/slave 50 MHz • SD-card interface support • Dimensions: 54,8 x 28,6 x 8 mm without header • Weight: 7,5 grams • Integrated 3.3V regulator (500mA) • USB connector • 4 mounting holes (2.5mm) • RESET button

ESP32 Type-C USB Board WiFi Bluetooth ESP-32 ESP-32S ESP-WROOM-32 CP2102 38Pin

ESP32 płytka z ESP-WROOM-32 38-pin z układem CP2102 USB-C - Sklep msalamon

Advitiya?- ESP32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (38 PIN) + Micro USB Cable - Price History

This module is safe, reliable, and scalable to a variety of applications. The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.

KeeYees Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip CP2102 for ESP32 for Arduino (2pcs)

Newbie Question] Follow up from last time. Decided to go to ESP route. Uh, what are the advantage of CH340 or CH9102 or CP2102 over the normal ESP32 or 32s? : r/arduino

Esp32 Wroom 32 Development Board Type c Ch340c/ Usb Cp2102 - Temu

NodeMcu ESP32 WROOM-32 38 pins Development Board Dual Core WLAN WiFi Bluetooth

ESP32 DevKit 38 Pins - Robazz

Placa Desarrollo Cp2102 Wifi Bluetooth Wroom 32 Esp32 38 Pin

Esp32 Breakout Board Gpio 1 Into 2 Compatible With 38 Pins - Temu Japan

ESP32 Wroom (ESP-WROOM-32) WIFI+Bluetooth Development Board Dual Core – ControllersTech

AITRIP 3pcs Development Board 2.4 G Hz Dual Core WLAN Wi Fi + Bluetooth

ESP32 ESP-32 ESP-32S ESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (38 PIN) at Rs 398.00, WiFi Module

AITRIP 5PCS 38pin ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE : Electronics

Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.The module has 38 pins and has more features than a 30-pin module. And smaller