Flaring Tools – Uniweld Products, Inc.

4.9 (511) · € 29.99 · En Stock

Unwieldy 70078 PVC Ratchet Pipe Cutter is ideal for cutting plastic pipe commonly used for condensate drain lines, irrigation and electrical conduit. Easy to use ratchet action mechanism cuts cleanly through, up to 1 5/8 inch O.D., all kinds of plastic pipe including: PVC, CPVC and Polyethylene. The hardened steel blade holds a sharp edge and is easily field replaceable with our Part# 70080 Replacement Blade.

Uniweld 70078 PVC Ratchet Pipe Cutter

Uniweld Deluxe Flaring Tool – Uniweld Products, Inc.

Uniweld 70071 Deluxe Flaring Tool : Automotive

Uniweld Deluxe Flaring Tool.

Specifically designed to meet R-410A flaring specifications and all 45° flares. Internal break away clutch that disengages when flare is completed,

Uniweld UDFT Electric/Manual R-410A Ratchet + Clutch Flaring Tool

Used for 45 Degree flaring od 1/8in, 3/16in, 1/4in, 5/16in, 3/8in, 7/16in, 1/2in, 5/8in, and 3/4in OD soft copper, aluminum, and brass tubing Easily

Uniweld 70007 Flare/Burnish and Swaging Tool Kit

Uniweld Deluxe Flaring Tool.

Uniweld 70071 Deluxe Flaring Tool : Automotive

Uniweld Flame Tools.

Uniweld UEK1 - Expander Swage Kit

RHP500, Uniweld RHP Nitrogen Regulator - 500 psi

Flaring / Swaging Tools – Uniweld Products, Inc.

Uniweld Product Tip: Cap'n Hook MTF-5

Uniweld VV1 Vapor Vue Visible Vapor Charging Device with 1/4 Flare Fitting Uniweld’s Vapor Vue absorbs heat naturally and flashes the liquid refrigerant from the cylinder and charges into the system as a vapor. Connecting the Vapor Vue to the low side of your charging manifold will increase the charging rate up to 8 times faster and the liquid is controlled by adjusting the manifold valve and monitoring the vapor rate trough the double sight glass.