IDEAL® Auto Range Multimeter at Menards®

4.7 (559) · € 22.50 · En Stock

The IDEAL 61-337 digital multi Meter is a CAT III 600 rated auto ranging digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 600V AC and DC, AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (F/C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter. It's display can be backlit. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The rubber boot has two probe storage points, has built-in probe tip holders to allow measurements while holding the meter in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. Rugged over molding enhances grip and drop protection. This meter features hold, relative, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probes and thermocouple storage.
The IDEAL 61-337 digital multi Meter is a CAT III 600 rated auto ranging digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 600V AC and DC, AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (F/C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter. It's display can be backlit. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The rubber boot has two probe storage points, has built-in probe tip holders to allow measurements while holding the meter in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. Rugged over molding enhances grip and drop protection. This meter features hold, relative, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probes and thermocouple storage.

Southwire® Auto-Ranging Digital Multimeter at Menards®

IDEAL Non-contact Digital Truerms Multimeter 10 Amp 1000-Volt in the Multimeters department at

Ideal 61-357 1000V Auto Range TRMS Multimeter

Automotive Dwell Meter Digital Multimeter Autoranging TRMS 5999 Counts ACA/DCA M

Performance Tool® Digital Automotive Multimeter at Menards®

Best Automotive Multimeter Review (2024 Ratings)

IDEAL Non-contact Digital Manual Ranging Multimeter 600-Volt in the Multimeters department at

IDEAL Non-contact Digital Clamp Meter Multimeter 400 Amp 600-Volt in the Multimeters department at

IDEAL Non-contact Lcd Ac/Dc Multimeter 10 Amp 1000-Volt in the Multimeters department at

Commercial Electric Pocket Size True RMS Digital Multi-Meter DMM-8132 - The Home Depot

Victor 88c Digital Multimeter Inductance Frequency Temperature Capacitance Resistance Meter Diode Ohm Voltage Lcd Display Tester - Multimeters - AliExpress

UL certified CAT III 600V AC/DC 10A AC/DC auto ranging digital multimeter Lead position warning and open fuse indication Built-in probe tip holders