4.5 (664) · € 10.50 · En Stock
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating. The M2 nozzle can operate up to 450C without losing the hard
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.
The M2 nozzle can operate up to 450C without losing the hardness.
M2 Hardened High Speed Steel:68 HRC
Plating:Electroless Nickel
Plating Hardness:70-73 HRC
Coating:WS2 coating
Coefficient of friction: 0.035
Orifice size available: .4mm, .6mm, .8mmMade in USA by Micro Swiss
Limited lifetime warranty against wear
Manufacturer's Part Numbers: 0.4: M2500-04 0.6: M2500-06 0.8: M2500-08
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed
M2 Hardened High Speed Steel Nozzle - MK8 (CR10 / Ender / Tornado / MakerBot)
Micro Swiss nozzles for Ultimaker 2+ — Micro Swiss Online Store
Micro Swiss A2 Hardened Steel Nozzle for MK10 All Metal Hotend
Micro Swiss NG - Direct Drive Extruder with engine for Creality Ender-5 series 3D Printers Botland - Robotic Shop
Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers, Micro Swiss Online Store
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating. The M2 nozzle can operate up to 450C without losing the hardness.
Micro Swiss MK8 Plated M2 Hardened High Speed Steel Nozzle .8mm
Micro Swiss Australia. The leading manufacturer of 3D printer nozzles – 3docity
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating. The M2 nozzle can operate up to 450°C without losing the hardness.
Micro Swiss M2 Nozzle RepRap - M6 Thread V6-1.75mm x 0.40mm
Micro-Swiss CM2™ HighFlow Nozzle 1.75mm - 3DJake International
Troodon 2.0 Compatible Parts
Micro Swiss LLC