4.7 (517) · € 225.00 · En Stock
Highlights Powered subwoofer enclosure 12" sub with polypropylene cone Built-in 150 watt RMS amplifier (450 watts peak) Remote bass-level control included Speaker- and line-level inputs 8-gauge amp wiring kit required (sold separately) Variable low-pass crossover (40-200 Hz, 12 dB/octave) Variable bass boost (0-12 dB at 45 Hz) Phase switch (0°, 180°) Frequency response: 35-120 Hz Fuse rating: 25A Dimensions: 22-3/8"W x 14-5/8"H x 11-7/8"D1 x 9-1/8"D2 Warranty: 1 year Features Amplifier: The power output from the built-in amplifier is 150 watts RMS (450 watts max). The amplifier is counter sunk into the back panel of the enclosure (the heat sink fins protrude approximately 3/8"). Signal Input: The amplifier has both speaker level (harness) and line level (RCA) inputs. The input sensitivity range is 50mV-4V for the line inputs and 400mV-16V for the speaker inputs. Crossover: The amplifier's low pass crossover point is continuously
Highlights
Powered subwoofer enclosure
12 sub with polypropylene cone
Built-in 150 watt RMS amplifier (450 watts peak)
Remote bass-level control included
Speaker- and line-level inputs
8-gauge amp wiring kit required (sold separately)
Variable low-pass crossover (40-200 Hz, 12 dB/octave)
Variable bass boost (0-12 dB at 45 Hz)
Phase switch (0°, 180°)
Frequency response: 35-120 Hz
Fuse rating: 25A
Dimensions: 22-3/8W x 14-5/8H x 11-7/8D1 x 9-1/8D2
Warranty: 1 year
Features
Amplifier: The power output from the built-in amplifier is 150 watts RMS (450 watts max). The amplifier is counter sunk into the back panel of the enclosure (the heat sink fins protrude approximately 3/8).
Signal Input: The amplifier has both speaker level (harness) and line level (RCA) inputs. The input sensitivity range is 50mV-4V for the line inputs and 400mV-16V for the speaker inputs.
Crossover: The amplifier's low pass crossover point is continuously variable from 40 to 200 Hz; the crossover slope is 12 dB/octave.
Bass Boost: The bass boost circuit provides a variable (0-12 dB) signal boost centered at 45 Hz.
Status LEDs: There are two status indicator LEDs on the amplifier. A green LED lights to indicate the amplifier is turned on and operating normally. A red LED lights to indicate the amplifier's protection circuitry has been activated. The protection circuit activates and the amplifier shuts down when the input voltage (power) is too high or too low, when the amp overheats, and when there is a short between the amp and subwoofer.
Enclosure Type
Ported
Finish Material
Carpet
Grille
metal
Connector Type
RCA, speaker-level
Bi-amp Inputs
No
Woofer Size (inches)
12
Woofer Material
Poly
Passive Radiator
None
Parts Warranty
1 Year
Labor Warranty
1 Year
Specifications
Frequency Response
35-120
Amplifier Power (RMS)
150 watts
Maximum Wattage
450 watts
Sensitivity
---
Impedance
---
Second Voice Coil Impedance
---
Crossover Point
70-120Hz
JBL BassPro 12 Ported powered subwoofer with 12 sub and 150-watt amp at Crutchfield
The JBL Stage slim enclosure are designed to fit in just about any vehicle with simple installation. It is slim, sleek, stylish, and don’t sacrifice on sound. HARMAN standard reliability testing: Speakers are carefully tuned to assure high SPL and low distortion. This means that the usual specifications as well as speaker characteristics are considered when tuning for the JBL sound. JBL speakers have to undergo a rigid testing process that would destroy lesser speakers.
JBL Dual 12 Car Audio Ported Enclosure
JBL SUBBP12 BassPro 12 Subwoofer System with Slipstream Port Technology
Enclosure Type Ported. Powered subwoofer enclosure. Woofer Material Poly. Status LEDs: There are two status indicator LEDs on the amplifier. Built-in
JBL SUBBP12AM Ported Powered Subwoofer w/ 12 Sub and 150-Watt Amp
JBL SUBBP12AM - 12” amplified 12” Subwoofer with Sub Level Control (Renewed) : Electronics
JBL GT-BassPro12 450W 12 Ported Loaded Subwoofer Enclosure with 8 AWG Amp Kit
JBL BassPro 12 Ported Powered subwoofer with 12 sub and 150-watt amp
powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak. 12 (305mm) woofer | 35 - 120Hz
JBL SUBBP12AM - 450 Watts (150W RMS) 12” Amplified 12 in. Ported Subwoofer with Sub Level Control and Distortion Free Bass with Gravity Magnet Phone
JBL BassPro 12 delivers 150 Watts of powered noise-free deep bass thanks to JBL's patented Slipstream port technology. The Slipstream port is mathematically engineered to keep airflow with the port turbulence-free, which avoiding the common shortcoming of traditional ported boxes. Coupled with the built-in 150Wrms amplifier the BassPro 12 really delivers. Also the Bass Volume Remote control is included for easy adjustment, no more stopping to pop the trunk.
JBL BassPro 12 Subwoofer System with Slipstream Port Technology
JL Audio 98360 Monoblock Class D 250 W Subwoofer Amplifier Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.
JL Audio JD250/1 - Monoblock Class D Subwoofer Amplifier 250 W
Customer Reviews: JBL BassPro 12 Ported powered subwoofer with 12 sub and 150-watt amp at Crutchfield
JBL BassPro 12 12 inch 150W Subwoofer for sale online
Customer Reviews: JBL BassPro 12 Ported powered subwoofer with 12 sub and 150-watt amp at Crutchfield
JBL GT-BassPro12 12 Loaded/Powered Subwoofer System + Sound Dampening + Amp Kit
JBL's jaw-dropping BassPro 8 subwoofer measures less than a cubic foot and delivers an impactful performance. Inside the slot-port enclosure is a system tuned 100 watts RMS class D amplifier and 8 (200mm) which delivers full bodied, mirror rattling bass.
JBL 8 Amplified Ported Subwoofer Enclosure with Sub Level Control