Link 1 down while connecting Orange PI to Pixhawk - Companion
4.8 (617) · € 31.50 · En Stock
Hi everyone, I’m trying to connect my Orange PI 3 to Pixhawk with telemetry. I make the connection below: I also enable the uart from the config file according to user mauel of the Orange PI and my UART3 port is active: When I run “mavproxy.py” in the command line I’m getting the output below: Auto-detected serial ports are: /dev/ttyS0 /dev/ttyS1 /dev/ttyS2 /dev/ttyS3 /dev/ttyS4 /dev/ttyS5 Those ports are exist but only the ttyS0 and ttyS3 active. My connections are true, I even tried
VOXL PX4 User Guide 0.9
Companion Computer out of an Android phone - APSync / Companion
Wire raspberry pi to pixhawk - Discussions - diydrones
Waiting for heartbeat from /dev/ttyAMA0 msg when connecting rsp
Sky-Drones AIRLink PX4 User Guide (main)
Waiting for the vehicle connection - QGroundControl - Blue
Is it possible to connect raspberry pi to ardupilot and make them
Connect Mission Planner to AutoPilot — Copter documentation
MavProxy.py link 1 down w/ RasPi - APSync / Companion Computers
Link 1 down while connecting Orange PI to Pixhawk : r/OrangePI
